The world's
most innovative
Bomb Disposal Suit, Setting new standards
in
personal protection for modern day EOD tecnicians, the EOD HELMET is
the
world's first Threat Level IIIA ballistic helmet available to military
and law enforcement agencies. EOD HELMET is the only EOD NIJ Standard-0101.06
helmet
in
the world that provides complete and absolute 360 degree protection at
the stated Threat levels.
The
EOD BOMB DISPOSAL SUIT also employs the most advanced technology in
design
and state-of-the-art fragmentation-defeating materials available in the
world today. Through extensive research and development spanning more
than
a decade in actual field tests, and the leading Bomb Disposal Suit
ensemble
capable of defeating record setting specifications against the number
one
threat faced by modern day EOD technicians... fragmentation.
The
use of state of the art materials underlines goal to increase the bomb
technician's survival rate by improving the fragment protection
characteristics
of the suit without increasing overall weight. It has been proven that
the greatest threat faced in a blast situation is the threat of
fragments
of different sizes and shapes tearing into the human body at supersonic
velocities.
The
exceptional performance in the other 3 major threats faced by EOD
technicians;
overpressure, impact and heat. New V50 and V0 (NO PENETRATION)
specifications
meet US MIL-SPEC 622E, superseding the non-ratified NATO STANAG 2920.
The
new EOD suit is the result of a combination of over ten years of
actual field testing with the United States and the Canadian
Governments.
It is the product of high technology materials derived from U.S.
military
applications. These state-of-the-art ballistic materials, until now,
have
only been used by the United States Department of Defense for the
protection
of its personnel. These new materials have now been employed in the new
lightweight chest and groin plates. These plates have achieved ground
breaking
V0 (NO PENETRATION) fragment defeating capabilities of ... 5471 FPS or
1667 M/S.
The
use of lightweight armor materials offers the best available protection
in the world today tested NIJ Standard-0101.06
. In fact, all live IED testing is taking place at a
distance of 1 to 2 meters, not at the old testing standard of 3 meters
(10 feet), since military and law enforcement EOD technicians may be
required
to work inside a 3 meter raduis.
The
most current testing data on fragments, overpressures, impact and burn
protection. This EOD suit is currently being used in 49 countries
around
the world.
|
The World's
First Threat Level IIIA
Helmet
The innovative
helmet incorporates
the world's highest ballistic integrity... Threat Level IIIA (9mm 124
gr,
FMJ at 1400 FPS as well as 44 Magnum 240 gr, SWC at 1400 FPS). The
helmet
shell is made of a lightweight ballistic fiber which has been tested
and
defeated fragments at 2,442 FPS, 683 M/S.
The helmet's
lightweight construction
weighing only 5,2 pounds without visor and 5,8 pounds with visor, and its
more
efficient ergonomic design allows for much greater visibility and
freedom
of movement. The helmet interior is optimized for impact protection
utilizing
a MIL SPEC shock absorbing foam tested and used to prevent 50 calibur
blunt
trauma to the human body. The EOD tech's ability to complete the
mission
successully is thereby improved by reducing fatigue and neck strain
while
providing maximum fragmentation and impact protection.
The helmet
incorporates high
quality communication electronics and a more efficient forced air
ventilation
system. The Battery Pack and Booster system provides up to five hours
of
continuous operation of the ventilation system. Replacable 9 volt
batteries
are available on request. Additionally, all electronic communication
componenets
are made to US Military Specifications and standards of performance.
These
improvements make the new
EOD helmet the world's safest and most comfortahle helmet you can wear.
Microphone:
MIL-M-26542/B Speakers:
MIL-E-25670/2B (USAF)
VISOR
The EOD visor
affords a significant
improvement in fragmentation and multiple hit capability. The fully
laminated
acrylic and polycarbonate construction enhances the visor's blast-load
structural integrity. The removable visor provides the wearer clear,
undistorted
vision.
Ballistic
Helmets & Visors
|
|
|
Ballistic
security Glass |
|
|
|
Ballistic
Plates & Shields |
|
|
|
Armoured
Cars . |
|
|
|
|
|
Executive
Protection Services
Ballistic
Insert V-50 Ratings |
Component |
V-50
Rating (m/s) |
Jacket/Arm/Collar/Foot |
560 m/s |
Rear Of Jacket
Covering Spinal Protector |
600 m/s |
Collar (Front) |
1125
m/s |
Chest/Groin Plates |
1220
m/s |
Thigh |
690 m/s |
Knee |
770 m/s |
Lower Leg With Insert |
620 m/s |
Component Weights
(Medium Suit) |
Component |
Weight |
Helmet/Visor |
2.7 Kg (6.0 lbs) |
Jacket/Trouser |
10.0 Kg (22.4 lbs) |
Sleeves |
2.04 Kg (4.5 lbs) |
Rear Leg Protection |
2.3 Kg (2.3 lbs) |
Ballistic Insert V-50
Rating |
Component |
V-50
Rating (m/s) |
Helmet |
400 |
Visor |
180 |
Chest Plate Steel
Backed By Jacket |
750 |
Chest/Back/Front Of
Legs/Arms |
450 |
|
|
|